HEPA Filter Terminal Housing

~ HEPA Filter Housing to suit Ceiling Grids
~ Allows for HEPA Filter Change within the clean room
~ Access Via attractive 4 Way Ceiling Grille
~ In Situ Leak Testing Points
~ Suitable for ISO Class 3 Cleanrooms
~ Knife Edge, and Liquid Seal Faces available


Applications

The Airclean Terminal Housing is suited for cleanroom applications using a wide range of HEPA Filters.

The HEPA Filter Terminal Housing is available with top, or side air entry for ducting above a false ceiling. Removeable grilles come as standard and fix below the Terminal husing in the cleanroom to allow access to the HEPA Filter within.

The Terminal Housing range includes a negative pressure design, which includes a prefilter which is changed from the room side, as is the HEPA Filter. The unit is usually mounted in the wall of the facility at low level.

Description

These filters consist of a coated graduated continuously spun glass filament in a pad form, contained within either a rigid cardboard casing, or a cardboard frame with perforates cap-punch grids. Stiffening bars can be provided if required.

Also a scrim backing can be supplied on the outlet face for special applications.

Our method of manufacture for this style of filter utilises modern hot melt adhesive techniques, which produce an extremely rigid and robust product.

Technical

The HEPA filter is retained positively using removeable clips.
Liquid Seal Filters can be accomodated

Click here to Download Data Sheet