Side Withdrawal Filter Casing
To Suit HEPA, Bags, Panels, and Carbon Filters

~ Filter Clamps ensure air tight seals
~ 40mm External Flanges
~ Fully Wealded Steel Construction
~ Lift Off Filter Access Doors both sides
~ Painted Finish
~ Weatherproofing Available for external mounting


Applications

Airclean Side Withdrawal Air Filter Housings are available in various combinations to suit your requirements of Panel, Bag, HEPA and Carbon Air Filters.

Originally these housings were designed for HEPA filters, and were designed with Final Air Filter Seals in mind to ensure that they have no air by pass, so that they will help systems pass their commisioning DOP Scan Tests.

As time has gone on this same Airclean now utilises the same Side withdrawal filter Housing for Activated Carbon Filters ensuring that no Odour bypass occurs through the filter.


Description

Side Withdrawal Filter Housings fully welded from steel, with a rigid air filter sealing face fixed into the casing. The sealing point of the HEPA filter is downstream of the access door to eliminate any bypass of the air. The unit is sealed following wealding and painting, to ensure that no leaks occur when under pressure.


Technical

The range will support any airflows in a modular format, with each housing taking up to a Two Filters Wide formation.

Suitability: HEPA Filters up to H15 of EN1882,

Colour: Hammer Finish Silver Grey (Many colours available upon request)

Click here to Download Data Sheet