Metal Framed Pleated Panel Air Filter – G4 to EN779:2012
Coarse 75% to ISO16890 / G4 to EN779
- Metal Framed Pleated Panel Filter available for high humidity applications.
- Commonly used on supply air applications where card frames can collapse
- Non Combustible Pleated Panel Filter
- Disposable Panel Air Filter
- Acts as a first stage filter offering G4 grade filtration
- Food Safe Air Filter
- Extended Surface
- Large Dust Holding Capacity
- Energy Efficient
Applications
The Metal Framed Pleated Panel Air Filter is a medium efficiency disposable air filter, suitable for high moisture environments such as air intakes from outdoors, or where traditional cardboard frames are not allowed as a non combustible solution is required.
This air filter has the same filtration characteristics as the cardboard framed pleated panel air filter, making it suitable for ventilation and air conditioning systems which require a higher efficiency and greater dust holding capacity than can be achieved with glass or synthetic panels.
The Metal Framed Pleated Panel is constructed in a fully galvanized steel frame, removing all cardboard elements, making the filter remain rigid and strong, and non combustible.
The Metal Framed G4 Pleated Panel Air Filter can be used where glass panels are undesirable, such as in the food industry and hospitals.
Metal Framed Pleated Panel Air Filters are often used as pre-filters on supply air systems to High Performance Bag Filters, or to protect heating or cooling coils from dust build up which leads to system inefficiency. Another common place to see a Metal Framed Pleated Panel Air Filters is to protect fans in extract systems for office blocks or kitchen extract systems.
Description
Metal Framed Pleated Panel Filters consist of a dry non-woven fabric media which is pleated to give an extended surface area, producing a low initial resistance for the same air volume, making this an energy efficient filter. The pleat is supported by an expanded galvanised steel mesh.
The pleated air filter media is contained within a fully galvanised steel frame and supporting mesh. The filter media is fully sealed into the frame with adhesive to ensure the highest rigidity and quality.
Technical
The pleated air filter media is Flame Retardant to UL Class II
Max Operating Temp 80 Deg C
Dust Holding Capacity for 50mm Filter = 840 g/m2
Dust Holding Capacity for 100mm Filter = 1260 g/m2
Nominal to Actual Size: less 6mm on H & W, 3mm on Depth
Rated Airflows based on Face Velocities : 22mm = 2.0m/s, 47mm = 2.5m/s, 97mm = 3.0m/s
Clean Pressure Drops at Rated Airflows : 22mm = 75Pa, 47mm = 75Pa, 97mm = 75Pa
Filter Selection Tables
For Non Standard Sizes please contact on 01622 832777 or fill in the contact form below:
